diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 44fde25bb221..f6a1513dfb76 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5663,6 +5663,7 @@
 					device);
 				j = NO_REPORT_LUNS (don't use report luns
 					command, uas only);
+				k = NO_SAME (do not use WRITE_SAME, uas only)
 				l = NOT_LOCKABLE (don't try to lock and
 					unlock ejectable media, not on uas);
 				m = MAX_SECTORS_64 (don't transfer more
diff --git a/Makefile b/Makefile
index 076d4e6b9ccc..c425537f3116 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 1
-EXTRAVERSION =
+SUBLEVEL = 2
+EXTRAVERSION = -rc1
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 562087df7d33..0cc6d35a0815 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -184,11 +184,6 @@ static void omap_8250_mdr1_errataset(struct uart_8250_port *up,
 				     struct omap8250_priv *priv)
 {
 	u8 timeout = 255;
-	u8 old_mdr1;
-
-	old_mdr1 = serial_in(up, UART_OMAP_MDR1);
-	if (old_mdr1 == priv->mdr1)
-		return;
 
 	serial_out(up, UART_OMAP_MDR1, priv->mdr1);
 	udelay(2);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index fad31ccd1fa8..1b4eb7046b07 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -342,6 +342,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* Agfa SNAPSCAN 1212U */
+	{ USB_DEVICE(0x06bd, 0x0001), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */
 	{ USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 53a227217f1c..99c1ebe86f6a 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -2734,7 +2734,7 @@ static int __init init(void)
 {
 	int	retval = -ENOMEM;
 	int	i;
-	struct	dummy *dum[MAX_NUM_UDC];
+	struct	dummy *dum[MAX_NUM_UDC] = {};
 
 	if (usb_disabled())
 		return -ENODEV;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index c799ca5361d4..74c497fd3476 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1712,6 +1712,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 	hcd->state = HC_STATE_SUSPENDED;
 	bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
 	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	if (bus_state->bus_suspended)
+		usleep_range(5000, 10000);
+
 	return 0;
 }
 
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index bf89172c43ca..84da8406d5b4 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -47,6 +47,7 @@
 #define PCI_DEVICE_ID_INTEL_DNV_XHCI			0x19d0
 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI	0x15b5
 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI	0x15b6
+#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI	0x15c1
 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI	0x15db
 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI	0x15d4
 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI		0x15e9
@@ -55,6 +56,7 @@
 #define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI		0x8a13
 #define PCI_DEVICE_ID_INTEL_CML_XHCI			0xa3af
 #define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI		0x9a13
+#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI		0x1138
 
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4			0x43b9
 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3			0x43ba
@@ -232,13 +234,15 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 	    (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI))
+	     pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI))
 		xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index aa2d35f98200..4d34f6005381 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -333,6 +333,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
 		hcd->skip_phy_initialization = 1;
 
+	if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK))
+		xhci->quirks |= XHCI_SG_TRB_CACHE_SIZE_QUIRK;
+
 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret)
 		goto disable_usb_phy;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ebb359ebb261..d90c0d5df3b3 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1878,6 +1878,7 @@ struct xhci_hcd {
 #define XHCI_RENESAS_FW_QUIRK	BIT_ULL(36)
 #define XHCI_SKIP_PHY_INIT	BIT_ULL(37)
 #define XHCI_DISABLE_SPARSE	BIT_ULL(38)
+#define XHCI_SG_TRB_CACHE_SIZE_QUIRK	BIT_ULL(39)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index ba655b4af4fc..1c9e09138c10 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -797,7 +797,7 @@ static int tower_probe(struct usb_interface *interface, const struct usb_device_
 				      &get_version_reply,
 				      sizeof(get_version_reply),
 				      1000, GFP_KERNEL);
-	if (!result) {
+	if (result) {
 		dev_err(idev, "get version request failed: %d\n", result);
 		retval = result;
 		goto error;
diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
index 655d9cb0651a..c12cdd015410 100644
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -16,7 +16,7 @@ config USB_SISUSBVGA
 
 config USB_SISUSBVGA_CON
 	bool "Text console and mode switching support" if USB_SISUSBVGA
-	depends on VT
+	depends on VT && BROKEN
 	select FONT_8x16
 	help
 	  Say Y here if you want a VGA text console via the USB dongle or
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 652d6d6f1f36..ff6f41e7e068 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -867,6 +867,9 @@ static int uas_slave_configure(struct scsi_device *sdev)
 	if (devinfo->flags & US_FL_NO_READ_CAPACITY_16)
 		sdev->no_read_capacity_16 = 1;
 
+	/* Some disks cannot handle WRITE_SAME */
+	if (devinfo->flags & US_FL_NO_SAME)
+		sdev->no_write_same = 1;
 	/*
 	 * Some disks return the total number of blocks in response
 	 * to READ CAPACITY rather than the highest block number.
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 711ab240058c..870e9cf3d5dc 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -35,12 +35,15 @@ UNUSUAL_DEV(0x054c, 0x087d, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_REPORT_OPCODES),
 
-/* Reported-by: Julian Groß <julian.g@posteo.de> */
+/*
+ *  Initially Reported-by: Julian Groß <julian.g@posteo.de>
+ *  Further reports David C. Partridge <david.partridge@perdrix.co.uk>
+ */
 UNUSUAL_DEV(0x059f, 0x105f, 0x0000, 0x9999,
 		"LaCie",
 		"2Big Quadra USB3",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-		US_FL_NO_REPORT_OPCODES),
+		US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
 
 /*
  * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 94a64729dc27..90aa9c12ffac 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -541,6 +541,9 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
 		case 'j':
 			f |= US_FL_NO_REPORT_LUNS;
 			break;
+		case 'k':
+			f |= US_FL_NO_SAME;
+			break;
 		case 'l':
 			f |= US_FL_NOT_LOCKABLE;
 			break;
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index 4a19ac3f24d0..6b03fdd69d27 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -84,6 +84,8 @@
 		/* Cannot handle REPORT_LUNS */			\
 	US_FLAG(ALWAYS_SYNC, 0x20000000)			\
 		/* lies about caching, so always sync */	\
+	US_FLAG(NO_SAME, 0x40000000)				\
+		/* Cannot handle WRITE_SAME */			\
 
 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };
diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h
index a71b6e3b03eb..83ee45fa634b 100644
--- a/include/uapi/linux/ptrace.h
+++ b/include/uapi/linux/ptrace.h
@@ -81,7 +81,8 @@ struct seccomp_metadata {
 
 struct ptrace_syscall_info {
 	__u8 op;	/* PTRACE_SYSCALL_INFO_* */
-	__u32 arch __attribute__((__aligned__(sizeof(__u32))));
+	__u8 pad[3];
+	__u32 arch;
 	__u64 instruction_pointer;
 	__u64 stack_pointer;
 	union {
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index 327ec42a36b0..de1917484647 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -1935,11 +1935,15 @@ static int snd_pcm_oss_set_subdivide(struct snd_pcm_oss_file *pcm_oss_file, int
 static int snd_pcm_oss_set_fragment1(struct snd_pcm_substream *substream, unsigned int val)
 {
 	struct snd_pcm_runtime *runtime;
+	int fragshift;
 
 	runtime = substream->runtime;
 	if (runtime->oss.subdivision || runtime->oss.fragshift)
 		return -EINVAL;
-	runtime->oss.fragshift = val & 0xffff;
+	fragshift = val & 0xffff;
+	if (fragshift >= 31)
+		return -EINVAL;
+	runtime->oss.fragshift = fragshift;
 	runtime->oss.maxfrags = (val >> 16) & 0xffff;
 	if (runtime->oss.fragshift < 4)		/* < 16 */
 		runtime->oss.fragshift = 4;
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 3bfead393aa3..91f0ed4a2e7e 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -40,6 +40,8 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
 	case UAC_VERSION_1:
 	default: {
 		struct uac_format_type_i_discrete_descriptor *fmt = _fmt;
+		if (format >= 64)
+			return 0; /* invalid format */
 		sample_width = fmt->bBitResolution;
 		sample_bytes = fmt->bSubframeSize;
 		format = 1ULL << format;
diff --git a/sound/usb/stream.c b/sound/usb/stream.c
index ca76ba5b5c0b..2f6d39c2ba7c 100644
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -193,16 +193,16 @@ static int usb_chmap_ctl_get(struct snd_kcontrol *kcontrol,
 	struct snd_pcm_chmap *info = snd_kcontrol_chip(kcontrol);
 	struct snd_usb_substream *subs = info->private_data;
 	struct snd_pcm_chmap_elem *chmap = NULL;
-	int i;
+	int i = 0;
 
-	memset(ucontrol->value.integer.value, 0,
-	       sizeof(ucontrol->value.integer.value));
 	if (subs->cur_audiofmt)
 		chmap = subs->cur_audiofmt->chmap;
 	if (chmap) {
 		for (i = 0; i < chmap->channels; i++)
 			ucontrol->value.integer.value[i] = chmap->map[i];
 	}
+	for (; i < subs->channels_max; i++)
+		ucontrol->value.integer.value[i] = 0;
 	return 0;
 }
 
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 54188ee16c48..4e2450964517 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -1499,17 +1499,16 @@ sub dodie {
 	my $log_file;
 
 	if (defined($opt{"LOG_FILE"})) {
-	    my $whence = 0; # beginning of file
-	    my $pos = $test_log_start;
+	    my $whence = 2; # End of file
+	    my $log_size = tell LOG;
+	    my $size = $log_size - $test_log_start;
 
 	    if (defined($mail_max_size)) {
-		my $log_size = tell LOG;
-		$log_size -= $test_log_start;
-		if ($log_size > $mail_max_size) {
-		    $whence = 2; # end of file
-		    $pos = - $mail_max_size;
+		if ($size > $mail_max_size) {
+		    $size = $mail_max_size;
 		}
 	    }
+	    my $pos = - $size;
 	    $log_file = "$tmpdir/log";
 	    open (L, "$opt{LOG_FILE}") or die "Can't open $opt{LOG_FILE} to read)";
 	    open (O, "> $tmpdir/log") or die "Can't open $tmpdir/log\n";
@@ -4253,7 +4252,12 @@ sub do_send_mail {
     $mail_command =~ s/\$SUBJECT/$subject/g;
     $mail_command =~ s/\$MESSAGE/$message/g;
 
-    run_command $mail_command;
+    my $ret = run_command $mail_command;
+    if (!$ret && defined($file)) {
+	# try again without the file
+	$message .= "\n\n*** FAILED TO SEND LOG ***\n\n";
+	do_send_email($subject, $message);
+    }
 }
 
 sub send_email {
